Manufacturers

Manufacturer Info

Sponsors

migliai di prodotti

Who's Online

There currently are 160 guests online.

Engine Control Unit Fiat Panda 1.3JTD 169A5000 8DF 8F2 8F3

  • Model: ECM-8DF-PAND
  • Manufactured by: (ECM)Centraline Motore

This is the request form and does not bind you to any purchases. Fill it out as thoroughly as possible to let me know what you want to repair and what defect needs to be corrected, so I can confirm feasibility or suggest alternatives. SUBMIT YOUR REQUEST EVEN IF YOU ARE UNSURE, SPECIFYING YOUR DOUBTS. Instructions on the intervention method will be provided later, based on the requested service. Scroll down the page to review the cases independently.



Select your ECU fault








Describe the fault as indicated by your customer, warning lights





Malfunction Review - Removal of Services and Correction of FAP - Immobilizer Codes and Solutions.

Fault Cases

  • Total malfunction, no communication in diagnostics, and the vehicle doesn't start.
  • Engine light on with the vehicle in recovery.
  • Immobilizer faults (does not recognize the code, does not start).
  • Malfunction excludes the ignition of a cylinder.
  • FAP, EGR, lambda, AdBlue, eco problems.

Detected Fault Codes Here is a collection of the main error codes detected during our work:

  • P2146 Fuel injector group "A" power supply voltage circuit/open
  • P1564 Control module selection
  • P2146 - Capacitor voltage fault, electrical short circuit to positive
  • P0601 Internal control module memory checksum error
  • P0697 Sensor "C" reference voltage circuit/open
  • P1564 Control module selection
  • U0426 Invalid data received from the vehicle's immobilizer control module.

Customer Reports Here are some of the most significant issues reported by our customers:

  • "Engine light on and vehicle in recovery, with error code P2146 Capacitor Voltage. Fiat Panda 169 1.3JTD 16V 169A5000, Control Unit Code 51896811"

  • "Due to current sent to the glow plug control unit signal, the vehicle starts but remains accelerated, error code P0697 Sensor 'C' reference voltage circuit/open. Fiat Panda Diesel (2012-01>) 1.3JTD 16V Turbo 4X4 FAP/DPF 55 Kw. Engine code: 199A9000. Control Unit Code 55249914"

  • "Engine malfunction light on, the problem seems to be due to the difference between the atmospheric pressure detected by the control unit and the absolute pressure in the intake manifold. Checking the parameters, we found that the atmospheric pressure detected is about 800 mbar, which makes me think this is the issue. Fiat Panda Diesel (2012-01>) 1.3JTD 16V Turbo FAP/DPF 55 Kw. Engine code: 199A9000. Control Unit Code 55246952"

  • "Fuel block. Body does not communicate with ECM. Oxidation in ECM. Error code U0426 Invalid data received from the vehicle's immobilizer control module. Fiat Panda Diesel (2012-01>) 1.3JTD 16V Turbo FAP/DPF 55 Kw. Engine code: 199A9000. Control Unit Code 55246952."

Revised ECM Control Units

  • MJD 8F2

    • MJD 8F2.B1 51896812 HW00A 9754-B187
    • MJD 8F2.B2 51896811 HW00A 9754-B287

  • MJD 8F3

    • MJD 8F3.P2 55249914 HW10P 2345-P231
    • MJD 8F3.P1 55246952 HW10P 2443-P730
    • MJD 8F3.P1 55246933 HW10P 1942-P124
    • MJD 8F3.PD 55259323 HW2FP 2940-PD44
    • MJD 8F3.PB 55261330 HW2FP 2940-PB45

 

This product was added to our catalog on Thursday 13 February, 2025.

Your IP Address is: 216.73.216.108
Copyright © 2026 CAMTECH SRL. Powered by CamTech S.r.l.
Privacy Policy Cookie Policy